DIVIDING SIMPLE PANEL (PSD)
It consists of a frame of three-dimensional steel covering inner polystyrene. The panel is finished in site applying a non structural layer with a thickness no less than 25 mm. The wall with the simple panel PSD is ideal to be used in non chargeable inner walls, for outer closings in rooms or commercial and industrial buildings. It has very remarkable thermal and acoustic isolation characteristics, it's resistant and economic.

Clic to jump to PSD panel tech sheet

NORMAL SIMPLE PANEL (PSN)
The structure erected with normal simple panels (PSN) is finished in site with two outer layers of structural mortar, performing so, loadable walls with excellent structural load capacities and a big acoustical and thermal isolation with a great economy. The PSN panel has besides, a three dimensional steel structure covering the polystyrene. The panel has a width of 1,200 mm and a longitude variable according to the necessities of the project. PSN can be used as much for carrying struture as for inner or outer closings.

Clic to jump to PSN panel tech sheet

REINFORCED SIMPLE PANEL (PSR)
The reinforced simple panel (PSR) is used for roofing or for intermediate floor structure combining in a unique element, the charging capacity and the isolation function, been used as lost plank. The PSR panel has a three dimensional steel structure covering the inner polystyrene. The slab is completed in site with a concrete pouring in the upper surface and a structural mortar in the inferior side of the slab.

REINFORCEMENT MESHES

ANGULAR MESH MA-15
This mesh type reinforces the joints wall - slabs and the joints wall - wall. These meshes are used either in the outer or inner side of joints.

ANGULAR MESH MA-25
This mesh reinforces the joints wall - slabs in cases that the angular mesh RG1-15 produces longitudinal insufficient overlap.

Clic to jump to reinformement meshes tech sheet

FLAT MESHES

FLAT MESH MAP-25
This mesh reinforces the corners of windows and doors. We also use them to restore cut meshes.

FLAT MESH MAP-40
This mesh reinforces the horizontal joints and complements other reinforcement general joints.

Clic to jump to reinformement meshes tech sheet

COMPLETE MESH MAE-240
This mesh is installed as additional reinforce in slabs in the central third of bay in the lower side of the slabs when the project, as per the structural calculations, requires it.

Clic to jump to reinformement meshes tech sheet

"U" MESH MAU
The mesh restores the continuity of panels at the side of doors and windows.

Clic to jump to reinformement meshes tech sheet

PLASTER SPRAYERS

These sprayers are available in two versions: for walls and for ceilings. Both wall and ceiling versions are supplied with 4 nozzles for coarse plastering, stratch coating and so on. Plaster sprayers with 2 nozzles for fine plastering, white coating, etc. can be supplied on demand. For technical reasons the nozzles are fixed and not interchangeable.
• They allow the saving of direct costs without the employment of specialized manpower.
• They allow the application of the mortar with an adherence that would not be possible to reach with a manual operation.